SHERWOOD R-125
Manual de Usuario

RECEIVER OPERATION
POWER ON/OFF

ENGLISH

Depress the POWER switch to turn on the Receiver. � The receiver will enter the standby mode and the standby indicator will light up When the receiver is switched to active mode (as described below in the sections titled 'Wake-up from standby' and 'SOURCE SELECTION'), the respective indicators light up and the standby indicator is switched off. To switch the receiver off depress the POWER switch again. STANDBY Switching the R-125 or your whole system to standby can only be done using the remote control. Switching a single source (e.g. CD) to standby Select the source using the source button on the remote control. Press the POWER button briefly. � The selected source will be switched to standby. Switching the whole system to standby Keep the POWER button pressed for more than 1 second. � The whole system will be switched to standby. � All light indicators will be switched off with the exception of the standby indicator on the receiver. NOTE : If the whole system is switched to standby when a recording is active, the recording (or CD-dubbing) will be cancelled. Wake-up from standby Press POWER or select a source with your remote control. � The system will switch from standby to the operating mode.

SOUND CONTROL Volume Adjust the sound volume with the MASTER VOLUME control. Balance Press BALANCE. � BAL(ance) lights up. Adjust the stereo balance between the left and the right channels with the BALANCE ( ) Treble Press TREBLE. � TRBL lights up. Adjust the high tones with the TREBLE ( from MIN to MAX. Bass Press BASS. � BASS lights up. Adjust the bass tones with the BASS ( MIN to MAX.

SOURCE SELECTION When the receiver is switched on, it will switch directly to operating mode as soon as a source is selected. � The receiver and the selected source will become active. � The selected source will be indicated on the display. You can also switch both the source and the receiver to the active mode by simply pressing PLAY on CD, Deck or one of the tuner preset buttons. Source selection using the remote-control handset Press (for more than 1 second) the respective source button on the remote control. � The selected source and the receiver will become active. When the TAPE MONITOR button is depressed, or selected via the remote control, only the component that is connected to the "TAPE" jacks can be heard. The TAPE MONITOR must be switched off in order to hear any other source. SURROUND MODE With the SURROUND MODE buttons you can select 5 different surround modes: PRO LOGIC, 3 STEREO, SIMULATED, THEATER, HALL, OFF.

) control

) control from

WARNING : Extreme settings at high volume may damage your loudspeakers!. Use the SURROUND MODE buttons to select the desired sound effect: PRO LOGIC, 3 STEREO, SIMULATED, THEATER or HALL Press MUTE on the remote control if you want to decrease the volume quickly. Press again to return to normal volume level. Press FM MODE if you prefer mono reception. Press again to return to stereo operation.

8